فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی











متن کامل


نویسندگان: 

Hattiangadi Jagdish

اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    17
  • شماره: 

    42
  • صفحات: 

    107-126
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    124
  • دانلود: 

    15
چکیده: 

Critical rationalism faces difficulty in Karl Popper’s Socratic formulation: “I may be wrong, and you may be right, and by an effort, we may find the truth.” But the Socratic elenchus, using refutations, can only give us negative knowledge of general principles, which is not the wisdom we seek. Affirmatively, we can only find a collection of opinions to be coherent, which is one of many. Francis Bacon proposed an improved elenchus to find general truths. You must take up a limited topic to study, then cross-examine your evidence for and against its apparent nature. Experiments contrary to evidence and presumed knowledge are entered as self-contradictions in tables of opposition recorded in an “experimental and natural history.” Such an account highlights a challenging puzzle if the account is to be made coherent. With enough problematized evidence, a coherent reading, or a solution of the puzzle, will be unique. Being both coherent and unique, it will be the truth about that limited reality being investigated. Unlike the method of hypothesis (“Anticipating Nature”), deciphering a coherent model is “Interpreting Nature,” allowing us to find a general truth on a limited topic. Isaac Newton achieved great success using Robert Boyle’s mechanistic version of this method. Using the “experimental philosophy,” he discovered general principles of optics and astronomy.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 124

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 15 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    0
  • دوره: 

    13
  • شماره: 

    2
  • صفحات: 

    209-213
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    458
  • دانلود: 

    277
کلیدواژه: 
چکیده: 

کانفورد بیان می کند که دانش در حال رشد سریع و مداوم می باشد و افراد جهت زندگی کاری خود از چنین دانشی استفاده می کنند. به منظور فعال کردن پرستاران در جهت پاسخگویی به این رشد و تغییرات، آموزش پرستاری باید به نحوه ای باشد که پرستاران پاسخگوی چالش های موجود در پزشکی امروز باشند، بنابراین آموزش پرستاری پدیده ای پویا است. ...

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 458

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 277 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    53
  • شماره: 

    4
  • صفحات: 

    291-297
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    44
  • دانلود: 

    5
چکیده: 

In this paper, recommended spiral passive micromixer was designed and simulated. spiral design has the potential to create and strengthen the centrifugal force and the secondary flow. A series of simulations were carried out to evaluate the effects of channel width, channel depth, the gap between loops, and flowrate on the micromixer performance. These features impact the contact area of the two fluids and ultimately lead to an increment in the quality of the mixture. In this study, for the flow rate of 25 μl/min and molecular diffusion coefficient of 1×10-10 m2/s, mixing efficiency of more than 90% is achieved after 30 (approximately one-third of the total channel length). Finally, the optimized design fabricated using proposed 3D printing method.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 44

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 5 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    49
  • شماره: 

    1 (پیاپی 86)
  • صفحات: 

    309-317
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    392
  • دانلود: 

    121
چکیده: 

در این مقاله به شبیه سازی فرآیند سوراخکاری لیزر فیبری سوپر آلیاژ اینکونل 718 به ضخامت 1 میلی متر، با روش اجزاء محدود پرداخته شده است. با استفاده از روش رویه پاسخ تاثیر پارامترهای فرکانس پالس لیزر (150 تا 550 هرتز)، توان لیزر (200 تا 500 وات)، موقعیت صفحه کانونی لیزر (5/0-تا 5/0+ میلی متر) و درصد زمان روشنی پالس (30 تا 70 درصد) به عنوان متغیرهای ورودی در 5 سطح و دو پارامتر خروجی قطر ورودی سوراخ و زاویه مخروطی به عنوان پاسخ های طرح بررسی شدند. نتایج تحلیل های آماری نشان دادند که پارامترهای ورودی و خروجی دارای نسبت مستقیم هستند. با افزایش متغیرهای ورودی قطر سوراخ ورودی و زاویه مخروطی سوراخ افزایش یافت. صحه گذاری مدل توسط نتایج آزمایشگاهی فرآیند انجام پذیرفت. با استفاده از نتایج شبیه سازی و تحلیل های صورت گرفته، فرآیند سوراخکاری لیزری به کمک روش تابع مطلوبیت کل، بهینه سازی گردید. در نهایت شبیه سازی تنش های پسماند این فرآیند در حالت پارامترهای بهینه انجام شد. مقدار تنش پسماند ایجاد شده روی سطح ورق، دارای بیشترین مقدار (14/0 مگاپاسکال) می باشد و با افزایش فاصله از سطح قطعه کار، مقدار تنش پسماند کاهش یافت.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 392

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 121 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1394
  • دوره: 

    3
  • شماره: 

    3
  • صفحات: 

    221-226
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    981
  • دانلود: 

    191
چکیده: 

روش استخراج احکام و پاسخ به مسائل یک علم، بر عهده متدولوژی آن علم است. به منظور تبیین متدولوژی اخلاق پزشکی در دانشگاه های اروپا و آمریکا، روش های مختلفی ارائه شده که یکی از آنها روش تجربی است. حال این سوال قابل طرح است که «آیا از این روش می توان در متدولوژی اخلاق پزشکی در اسلام استفاده کرد؟» تبیین این روش و جایگاه آن در استخراج و استنباط احکام و قوانین مطرح در اخلاق پزشکی از منظر اسلام در این مقاله مورد واکاوی و تحقیق قرار گرفته است. این پژوهش به صورت کتابخانه ای، توصیفی و تحلیلی صورت پذیرفته است. پس از تبیین روش تجربی و جایگاه آن در استخراج قوانین و احکام پزشکی، سعی بر آن است که نقش آن در متدولوژی اخلاق پزشکی روشن گردد. یافته های این مطالعه نشان داد که روش تحقیق در علوم تجربی مبتنی بر ارکانی چون مشاهده، طبقه بندی امور یا حوادث مورد بحث، فرضیه، تجربه و استقراست. استفاده از این روش، گرچه در جای خود مفید و برآورنده برخی از نیازهای انسانها بوده است، اما در حیطه اخلاق پزشکی - که عهده دار تبیین بایدها و نبایدهای مرتبط با حوزه پزشکی است - نمی تواند تامین کننده آرمان های آن باشد. اگر یافته های این روش را بتوان با دلیل عقلی به اثبات رساند، در متدولوژی اخلاق پزشکی اسلامی نقشی خواهد داشت. از یافته های این مطالعه نتیجه می شود که متدولوژی اخلاق پزشکی در اسلام مبتنی بر منابع حجیت- کتاب، سنت، عقل و اجماع - است لذا صرفا آن قسم از یافته های روش تجربی که به مدد عقل اثبات گردد، در این متدولوژی قابل استفاده خواهد بود. از روش تجربی می توان برای تنقیح موضوعات احکام در اخلاق پزشکی بهره جست.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 981

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 191 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    2021
  • دوره: 

    12
  • شماره: 

    1
  • صفحات: 

    31-43
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    130
  • دانلود: 

    0
چکیده: 

One of the most important tasks in designing the undercut slopes is to determine the maximum stable undercut span to which various parameters such as the shear strength of the soil and the geometrical properties of the slope are related. Based on the arching phenomenon, by undercutting a slope, the weight load of the slope is transferred to the adjacent parts, leading to an increase in the stability of the slope. However, it may also lead to a ploughing failure on the adjacent parts. The application of counterweight on the adjacent parts of an undercut slope is a useful technique to prevent the ploughing failure. In other words, the slopes become stronger as an additional weight is put to the legs; hence, the excavated area can be increased to a wider span before the failure of the slope. This technique could be applied in order to stabilize the temporary slopes. In this work, determination of the maximum width of an undercut span is evaluated under both the static and pseudo-static conditions using numerical analyses. A series of tests are conducted with 120 numerical models using various values for the slope angles, the pseudo-static seismic loads, and the counterweight widths. The numerical results obtained are examined with a statistical method using the response surface methodology. An analysis of variance is carried out in order to investigate the influence of each input variable on the response parameter, and a new equation is derived for computation of the maximum stable undercut span in terms of the input parameters.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 130

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نویسندگان: 

TABATABAEI N. | CERVANTES M.J. | Trivedi c.

اطلاعات دوره: 
  • سال: 

    2018
  • دوره: 

    11
  • شماره: 

    3
  • صفحات: 

    527-544
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    225
  • دانلود: 

    0
چکیده: 

The present work aims to investigate different methodologies for the numerical simulation of an upwind three-bladed wind turbine; which is supposed to be a base model to simulate icing in cold climate windmills. That is a model wind turbine for which wind tunnel tests have been completed at the Norwegian University of Science and Technology (NTNU). Using the assumption of axisymmetry, one-third of rotor has been modeled and periodic boundaries applied to include the effects of other blades. Then the full rotor was studied with transient simulation. To take in the effects of wind turbine wakes, the wind tunnel entrance and exit have been considered 4 and 5 diameters upstream and downstream of the rotor plane, respectively. Furthermore, the effects of tower and nacelle are included in a full-scale transient model of the wind tunnel. Structured hexa mesh has been created and the mesh is refined up to y+=1 in order to resolve the boundary layer. The simulations were performed using standard k-ε , Shear Stress Transport (SST) model and a sophisticated model Scale-Adaptive Simulation (SAS)-SST to investigate the capability of turbulence models at design and off-design conditions The performance parameters, i. e., the loads coefficients and the wake behind the rotor were selected to analyze the flow over the wind turbine. The study was conducted at both design and offdesign speeds. The near wake profiles resulted from the transient simulation match well with the experiments at all the speed ranges. For the wake development modelling at high TSR, the present simulation needs to be improved, while at low and moderate TSR the results match with the experiments at far wake too. The agreement between the measurements and CFD is better for the power coefficient than for the thrust coefficient.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 225

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1395
  • دوره: 

    5
  • شماره: 

    1
  • صفحات: 

    41-53
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    815
  • دانلود: 

    149
چکیده: 

در مقاله حاضر مطالعه ای آزمایشگاهی به همراه شبیه سازی عددی توسط نرم افزار اوپن فوم برای بررسی آثار شرایط جریانی و هندسی اتمایزر بر مشخصات اسپری تولیدشده روی یک اتمایزر دوسیاله هوا - وزش انجام شده است. در مطالعه آزمایشگاهی قطر میانگین سوتر قطرات توسط سامانه لیزری مالورن برای اعداد وبر در محدوده 727 تا 2250، رینولدز مایع 1650 و برای چهار قطر تزریق مختلف اندازه گیری شده است. شبیه سازی عددی با استفاده از روش ردیابی ذرات گسسته بر مبنای رهیافت اویلری - لاگرانژی انجام شده است. در شبیه سازی عددی به منظور مدلسازی شکست اولیه جت مایع از توزیع روزین راملر و برای شکست ثانویه نیز از مدل کلوین هلمهولتز - رایلی تیلور استفاده شده است. نتایج آزمایشگاهی و شبیه سازی نشان می دهد در یک وبر مشخص افزایش قطر تزریق مایع باعث افزایش قطر میانگین سوتر شده و در اعداد وبر بالا تاثیر قطر تزریق بر قطر میانگین سوتر کاهش می یابد. همچنین نتایج شبیه سازی نشان می دهد پارامترهای هندسی طول اختلاط گاز مایع و زاویه تزریق مایع تاثیر ناچیزی بر عمق نفوذ اسپری دارد، در حالی که قطر تزریق مایع تاثیر قابل توجهی بر این مشخصه اسپری می گذارد و با افزایش آن، عمق نفوذ اسپری کاهش می یابد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 815

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 149 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نشریه: 

پژوهش نفت

اطلاعات دوره: 
  • سال: 

    1392
  • دوره: 

    22
  • شماره: 

    72
  • صفحات: 

    38-57
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    1226
  • دانلود: 

    481
چکیده: 

بهینه سازی تولید از میادین هیدروکربوری یکی از دغدغه های اصلی مدیریت مخازن نفت و گاز است. در این راستا از تکنولوژی چاه هوشمند که در دهه اخیر توسعه یافته، استفاده می شود. از جمله چالش های مهم این تکنولوژی، تنظیم بهینه شیرهای کنترلی هوشمند است. در این مقاله با هدف بهینه سازی تنظیمات شیرهای کنترلی هوشمند، نتایج حاصل با حالت معمولی مقایسه شده است. در این راستا از روش های طرح آزمایش تاگوچی و سطح پاسخ برای مدل سازی و تعیین ارتباط تنظیمات شیرهای کنترلی با مقدار تولید نفت و بهینه سازهای غیرخطی برای تعیین تنظیمات بهینه شیرهای کنترلی به منظور بیشینه کردن تولید نفت، کمینه کردن تولید آب و کاهش زمان محاسبات استفاده شده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1226

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 481 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    2011
  • دوره: 

    1
  • شماره: 

    1
  • صفحات: 

    45-52
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    318
  • دانلود: 

    0
چکیده: 

Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard software package. Material property of AISI 1010 is used in FE model and experiments.The aim of this study is to identify the response related to deformation and characterize the effect of laser power with respect to the bending angle for a square sheet part. An experimental setup including a Nd: YAG laser Model IQL-10 with maximum mean laser power of 500 W is used for the experiments to verify FE analysis results. It is observed that numerical results are relatively in good agreement with the experimental results. Results also show that increasing laser power increases the bending angle.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 318

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button